The Skeans SG Series Cylinder was conceived in the 1970's.  It is designed for use in the rugged resource industries of Western Canada to supplement the NOPAK CL1 design.  It incorporates double rod bearings, bolt on gland rings and a clevis jam nut.  Optional piston rod diameters, larger clevis pin sizes, larger trunnion horn diameters are standard catalogue items.  To satisfy the need for higher speeds and constant operation, you may also choose to utilize a wear ring and low-friction seals.  Air pressure ratings range from 150 PSI - 450 PSI.

3 - 5 day standard Delivery ex Skeans

For more design depictions and technical information on the SG Cylinder click here.

SKEANS OWN SG SERIES & NOPAK
2"-14" Bore

.

NOPAK CL6 NFPA HEAVY DUTY
1-1/2"- 8" Bore

The CL6 is the heavy duty version of the NOPAK NFPA design cylinder.   The construction is very similar to the SG Series, but this cylinder uses a bolt on gland ring or a screw on gland when using a head plate for extra strength.  All parts of this cylinder are steel, using a hard anodized aluminium barrel.  Being NFPA, this cylinder is also available in all standard configurations.   The pressure rating for these cylinders is 250 PSI - 450 PSI. 

3 - 5 day standard Delivery ex factory

BIMBA, the originator of unitized,

 stainless steel body cylinders, offers you more solutions to your design problems.  Choose from 12 bore sizes, in 8 mounting styles.  Over 1500 catalogue models available, including solutions to Position Sensing, Speed Control, Load Deceleration etc...

BIMBA STAINLESS
5/16"-3" Bore Non-Repairable

TRD NFPA CYLINDERS
1-1/2"-10" Bore

TRD offers a NFPA Interchange with their Aluminium Electroless Nickel, Stainless Steel, or Triple Non-Rotating Rod Series.  These cylinders are pre-lubricated and rated for 250 PSI (pneumatic) and 400 PSI (hydraulic).  Also available are a full line of Alignment Couplers and Air-Oil Tanks. 

4 - 6 day standard Delivery ex factory

FLAIRLINE
1-1/8"- 2" Bore Repairable

   

PHD CYLINDER PRODUCTS

PHD offers a wide range of pneumatic and hydraulic industrial automation actuators, designed to help companies across all industries optimize their manufacturing processes.  Their products consist of a full line of hydraulic and pneumatic cylinders, escapements, grippers, linear slides, rotary actuators, clamps, multi-motion actuators, switches and sensors.  With a wide variety of bores available, PHD can actuate any application.

Standard product delivery 2 - 4 days ex factory

The Series GRR Guardian™ Gripper pictured here provides high grip force and is available in long jaw travels (150, 200, 250, & 350 mm).  The unit's rugged design and jaw construction can withstand high impact and shock loads.  This new heavy duty gripper is designed for robust part gripping and performs with precision in even the most demanding industrial applications, including centering and registration of heavy parts, small engine block manufacturing, automotive wheel rim manufacturing, foundry applications, and many more! PHD offers grippers for any size and style of application, contact Skeans for more information.
 

PHD  AUTOMATION PRODUCTS

TOL-O-MATIC ACTUATORS

  TOL-O-MATIC makes products for anything that moves.  They manufacture a full line of Rodless Actuators; Magnetically Coupled Cylinders and Slides, Linear Slides, 3 styles of Band-type Cylinders, 3 styles of Cable Cylinders; Rod Cylinder Slides (3 styles to choose from); Rotary Actuators (Vane & Rack and Pinion); and Grippers (Parallel & Angular)

The Skeans' Pneumatic Linear Positioning System is designed for use in industries that require linear positioning technology, but may not require the accuracy achieved by a costly and complex motion control system.  Comes in two series: Bimba Position Feedback Cylinder and Nopak SG. The cylinders are available in a variety of styles and bores, with accuracies of 0.05" or better to support numerous industry protocols. It integrates FC-2 Electronics Module and employs Fuzzy Logic to interpret both the feedback from the cylinder and the user's desired cylinder position to control the standard MAC valves which are used to position the cylinder.